For removing and installing bushings and bearings.

18.2-ton pull type hydraulic cylinder provides effort- and time-saving removing and installing works.

Includes 4 spindles: M10 × P1.5, M12 × P1.75, M14 × P2.0 and M16 × P2.0.

Sleeve sizes: 18-60 mm (ID) and 26-68 mm (OD) with 2 mm increments.

Universal application.

For removing and installing bushings and bearings.

10-ton manual hydraulic pump provides effort- and time-saving removing and installing works.

Tool frame helps working stabilization and alignment.

Includes 4 spindles: M10 x P1.5, M12 x P1.75, M14 x P2.0 and M16 x P2.0.

Sleeve sizes: 18-60 mm (ID) and 26-68 mm (OD) with 2 mm increments.

Universal application

For removing and installing bushings and bearings.

18.2-ton hydraulic cylinder provides effort- and time-saving removing and installing works.

Tool frame helps working stabilization and alignment.

Includes one M20 × P2.5 spindle.

Sleeve sizes: 18-60 mm (ID) and 26-68 mm (OD) with 2 mm increments.

Universal application.

For removing and installing bushings and bearings.

Equipped with sleeve sizes from 34-66mm (ID) and 44-82mm (OD) with 2mm increments.

Includes 4 spindles with two 27mm hex nuts: M10 × P1.5, M12 × P2.0, M14 × P2.0 and M16 × P2.5.

Provided with two step discs with two sides (A and B sides). Discs have tracks for fitting all sleeves, without needing several individual step discs.

Tool NOT designed to be used with an air/impact wrench.