Set for testing leaks in automotive cooling system and refill new coolant by creating a vacuum in cooling system.

Updated adapters. Please refer to the "Applications" tab below. For detailed applications, please contact us directly..

New adapters included in this kit:

- Adapter 24 for Hyundai and Kia new models, including EVs

- Adapter 25 (X) for Volvo 2.0L twin engines

- Adapter 3Y for Tesla Model 3 and Model Y

- Adapter SX for Tesla Model S and Model X

- Adapter F with a 90° turn for Ford with limited access

- Adapter J for GM 3.6L Hybrid and Fiat 500e

- Adapter MG for MG models, including EVs

- Adapter P for Porsche Boxster and Cayman

- Adapter Y for BYD models, including EVs

Set for refilling new coolant by creating a vacuum in the cooling system.

No need to undergo the time-consuming air bleeding after refilling new coolant.

Conical adapter offers a wide application to different radiator filler necks on heavy duty vehicles.

Large internal passages allow fast refill, suitable for large-volume heavy duty cooling systems.

Swivel gauge can be turned at 360°. Users can easily read the gauge even when the tool is mounted vertically on a truck’s expansion tank.

For anti-spill coolant refilling and air bleeding.

Includes 4 extension pipes for confined space or tricky angles.

Transparent lower chamber displays the amount of air bubbles remaining in the radiator.

Includes a universal adapter with rubber rings fitting most of radiator and expansion tank filler necks.

Funnel capacity: 1,600 ml / 54.1 Oz. suitable for passenger cars, trucks and heavy duty vehicles.

Set for testing leaks in automotive cooling system.

Adapters and pump are made of light weight nylon 6-6.

Provided with blue and black connectors are testing pressure caps.

Includes 19 adapters (No. 3 - 21) for major brands on the market.

Application list shown below is for reference only. More detailed information can be obtained by contacting us directly.

Powerful flush cleans impurities in cooling system with a pulsating effect.

Adjustable trigger to provide pulsate flush and regular consistent-pressure flush functions.

Includes a conical adapter for fitting radiator filler necks.

5/8” and 1/2” heater hose adapters and a small conical adapter for flushing heater side.

Connects to air compressor and garden hose for flushing the cooling system.

Special back pressure one-way valve to avoid excessive pressure accumulated in water hose.

Set for refilling new coolant by creating a vacuum in cooling system.

No need to undergo the time-consuming air bleeding after refilling new coolant.

Cone-shaped adapter offers a wide application to different radiator filler necks.

Chain can be hooked underneath vehicle’s hood.

Pressure pump to test leaks in cooling system.

Provided with 3 twist-on type and 16 threaded type adapters, covering almost all types of car makes and models on the market.

Vacuum-type coolant refill tool has large internal passages to allow coolant to be refilled fast.

Radiator cap test tubes (black and blue) to test if the radiator cap from the car has leaks.

Coolant hose and drain hose are made of cold-resistant material.

Set for testing leaks in head gasket without removing engine cylinder head by testing presence of CO2 in cooling system.

Includes US-made CO2 tester fluid.

Tester fluid changes from blue to green or yellow if CO2 is present in coolant.

Provided with a rubber adapter and three test caps for fitting most radiator filler necks.

Rubber bulb helps draw vapor from radiator into test chambers.

Tester fluid with MSDS and SVHC compliance.

Application shown below is for reference only. Contact us directly for more detailed applications.