Highly versatile tool kit, provided with a 5 lb slide hammer, for a variety of pulling operations on car.

Including a front hub puller and rear axle puller for most CV axle removal and gear hub bearing replacement.

Including dent puller, and other parts for pulling press-fit parts, such as bushings, bearings, gears, and seals ... etc.

Jaws can be assembled into 2-way and 3-way yokes for pulling either internal or external bearings.

Forged carbon steel used as the primary material that provides high strength and corrosion proof, and is resistant to severe sliding applications.

Set for pulling blind hole bearings off in an energy saving way.

Includes a slide hammer and a puller.

Provided with adapters that can be expanded within the blind hole for stronger connection.

Quickly stop fluid when disconnect fuel lines, A/C lines, transmission cooler lines, and brake lines, for Banjo type and 5/16” size.

Long reach hose pinching tool for pinching small hoses fast and effortless.

Yellow plugs are available in 3/16”, 1/4” and 5/16” sizes.

Tube separator for helping disconnect steel type fuel lines.

Set for pulling blind hole bearings off in an energy saving way.

Includes a slide hammer and a puller.

Provided with adapters that can be expanded within the blind hole for stronger connection.

Kit for testing and diagnosing most systems that require pressure or vacuum to operate, for example, intake manifold vacuum, fuel pressure valve, EGR, air conditioning, and forced-air induction systems.

Pump with a sturdy nylon case and with a gauge that can test both pressure and vacuum.

Accessories include a reservoir bottle, caps, hoses, and adapters for one-person brake bleeding.

Provided with a pack of adapters for brake bleeder valves and pressure/vacuum tests.

To re-face diesel injector seats for fitting new or reconditioned injectors by cleaning carbon deposits on injector seats.

Unique double lock design provides safer works and better results.

Contents include - 17 × 17mm flat reamer, 15 × 19mm flat reamer, 17 × 19mm flat reamer, 17 × 21mm flat reamer, 17 × 17mm angled reamer, and an injector cleaner.

Includes a pilot post and T-handle.

Helps avoid potential risks of blow-by gases.

For testing diesel compression pressure.

High quality hydraulic pressure gauge provides accurate reading and prevents damages on gauge due to high pressure.

Glow plug adapters are helpful when diesel injectors are difficult to remove because of carbon deposits.

Provided with a 90-degree adapter for fitting gauge to injector (or glow plug) adapter in limited spaces.

Includes 4 injector adapters and a universal injector adapter kit (contained in small box). The clamp-on adapters offer more applications on truck, van, bus, marine, and agricultural machinery.

Set for pulling off seals, O-rings or tiny parts.

Includes a crankshaft seal puller for removing seals on crankshaft pulley by leverage force.

Special tip angle provides a wide application.

No space limitation.

Tool for separating old sealant on oil pan.

High quality SK-5 blade provides satisfactory sealant separation.

Can also use on cylinder head cover, transmission pan, differential covers and other sealant joints in a vehicle.

Includes a bronze blade as a replacement. Ideal for aluminum alloy oil pan as it avoids damages on pan surface.

Provided with cleaning pads (15 pcs) for cleaning pan surface.

Kit for testing vacuum in intake manifolds, automatic transmissions, fuel control, EGR, air conditioning and heating system.

Also available for brake bleeding: one-person operation.

Includes a 200 ml reservoir bottle for bleeding brake fluid.

Provided with a pack of adapters for different brake bleeder valves and vacuum tests.

Apply to all automotive multimeters and extended lines of probe for oscilloscope.

Easy connections offer fast checking on electric circuits.

Probes pierce through insulated materials on wires, minimizing risks of oxidation.

Wire checking clip is useful for checking wires that are in limited access locations.

Apply to all automotive multimeters and extended lines of probe for oscilloscope.

Easy connections offer fast checking on electric circuits.

Probes pierce through insulated materials on wires, minimizing risks of oxidation.

Wire checking clip is useful for checking wires that are in limited access locations.

Kit includes connectors and terminals for testing major automotive electric systems.

Can be used with a digital multi-meter.

Universal application

Quick and accurate test kit for clogged or malfunctioned catalytic converter.

Adapter with M14-M18 threads for lambda sensors.

Gauge reading: 0-1.5 bar / 0-20 psi.

Teflon tube with strong heat resistance, >280°C / 536°F.

Includes a special adapter for some Toyota and Mitsubishi car models.

This diagnostic set is to inspect low pressure or return fuel side of diesel engines.

Two manometers with different scales (-1 - 5 bar and -1 - 15 bar) offer more accurate test results.

Ten fuel line adapters cover a wide range of diesel engines and car makes.

Translucent tube on adapters help observe impurities and bubbles in the fuel.

2 meter long hoses help connections in confined areas in engine compartment.

For testing return fuel volume on common rail low pressure system.

Mechanics can find which cylinder is faulty without removing injector or a diagnosis computer.

Includes adapters for major injector types: Bosch, Siemens, Delphi and Denso.

Provided with 6 test tubes with lines for easy observation on return fuel volume.

Each scale on test tube indicates 3 ml volume.

Seal installation with various sizes to fit seal with different sizes.

Tool set to help install seals evenly.

Includes a crankshaft seal puller for removing seals on crankshaft pulley by leverage force.

Special tip angle for removing seals easily.

No space limitation.